How to Clean A Reverse Osmosis System – Step by Step

How to Clean A Reverse Osmosis System – Step by Step

A Reverse Osmosis System cleans drinking water, so it will be safe, taste pure and refreshing as it was meant to be. Coffee will taste better and plants may even improve. Simplistic in design, it frees up counter top space and needs simple maintenance.

[thrive_headline_focus title=” Harmful Elements ” orientation=”left”]

The water treatment device takes action by filtering out harmful materials from water by enabling pressure that forces molecules into a semi-porous membrane which facilitates reverse osmosis. Various contaminants, along with odors are removed that can cause water to be harmful and taste foul. Easy to use, a Reverse Osmosis System just requires periodical general cleaning and filter changing.

[thrive_headline_focus title=” Easy Access to Clean Water ” orientation=”left”]

A standard countertop model allows you and loved ones to appreciate lengthy periods of pure water, before any filter changes are required. Unlike water filters years ago, today’s contemporary Reverse Osmosis units are made so filter change is simple and quick. Cleaning the unit’s tank, which is the chamber holding the water, is also simple to clean.

While the general maintenance cleaning instructions and tasks are provided with each unit, owners of course have the option to have water filtration professionals accomplish the task. However while the water tank requires occasional cleaning, it is actually quite simple to do yourself. Just follow these steps:

[thrive_headline_focus title=” Step 1 – Gather Needed Items” orientation=”left”]
  • Bucket or Plastic Tub
  • Funnel
  • Plier or Wrench
  • Bottle Brush
  • Sponge or Rags
  • White Vinegar and Mild Soap
[thrive_headline_focus title=”Step 2 – Undo Tank ” orientation=”left”]

Underneath the sink, you will see the shut-off valves. This connects to the main water supply-line for the filtration system (with this task you usually do not need a tool for its manipulation). This tank holds the filtered water that is provided to it by way of a waterline that is spread from the from the filter compartment of the system.

Find the initial point that the inward water is attached to the reverse osmosis tank (known as the waterline). Be sure to place some old rags or cloth underneath the tank and surrounding area for any water spills. You will notice that the waterline is fastened to a little nut made of plastic. Get your wrench or plier to loosen this nut and let go of the waterline. To avoid disturbing the tank during cleaning, the water tank is safely secured by placing them over durable hooks that are nailed into wall. Remember to not try un-hooking the water tank.

[thrive_headline_focus title=” Step 3 – Tank Cleaning” orientation=”left”]

Mix a cleaning solution that is non-toxic, implementing a cap or two of white vinegar. After mixing this into a bucket holding three gallons of water, place the funnel in the tank opening or waterline, and pour the solution through the funnel. Next, focus on the outside of the tank by grabbing your sponge and mixing up some water and mild soap. Thoroughly clean the outside. Take your bottle brush and lightly scrub the tank inside.

[thrive_headline_focus title=” Step 4 – Finishing Up ” orientation=”left”]

Take a rag to wipe off the tank surface. The waterline should not be re-connected. Ensure the plastic nut is tightened, using your plier or wrench. Open up the main valve for the water connection. Since the tank may contain bits of the cleaning solution in the water, use the first gallon for household chores, not abrupt consumption. This will ensure that the tank water is safe for drinking.

The simple reverse osmosis system ensures that drinking water if free from contaminants, often detected in tap water. You will enjoy clean and crisp drinking water!

Related Posts